low current t-100 & t-1 3/4 solid state lamps absolute maximum rating (t a =25c) parameter her yellow green units power dissipation (derated from 92c at 1ma/c) 27 24 27 mw peak forward current (pw 1 ms, df 30 %) 25 20 25 ma continuous forward current 7.5 7.5 7.5 ma lead soldering time at 260 c 5 5 5 sec reverse breakdown voltage (v) 5 5 5 i r = 100a operating temperature -55 to + 100 -55 to +100 -55 to +100 c storage temperature -55 to +100 -55 to +100 -55 to +100 c electrical / optical characteristics (t a =25c) her yellow parameter hlmp-1700/4700hlmp-1719/4719 luminous intensity (mcd) minimum 1.0/1.2 1.0/1.2 typical 2.0/2.0 2.0/2.0 fo rward voltage (v) maximum 2.2 2.7 typical 1.8 1.9 peak wavelength (nm) 635 585 spectral line half width 45 35 viewing angle () 50/35 50/35 green hlmp-1790/4740(mv2454) 1.0/1.2 2.0/3.0 2.7 1. 9 565 30 50/35 condition i f = 2ma i f = 2ma i f = 2ma i f = 2ma i f = 2ma
low current t-100 & t-1 3/4 solid state lamps disclaimer fairchild semiconductor reserves the the right to make changes without further notice to any products herein to improve reliabili ty, function or design. fairchild does not assume any liability arising out of the applic ation or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. life support policy fairchild?s products are not authorized for use as critical components in life support devices or systems without the express writte n approval of the president of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or 2. a critical component in any comp onent of a life support systems which, (a) are intended for surgical device or system whose failure to perform can be implant into the body,or (b) support or sust ain life, reasonably ex pected to cause the fail ure of the life and (c) whose failure to perform when properly support device or system, or to affect its safety or effectiveness. used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. http\\:www.everlight.com ? 2006 everlight electronics co., ltd
|
